Lapped Joint Stem
Item #: LJSECR
One-piece Lapped Joint Stems for Floating Flanged Hosetails, available in sizes 2", 3" & 4".
VF Series
Item #: VFSeries
Flat face couplings designed to connect the braking circuit of trailers to the hydraulic circuit of agricultural machines. ISO 5676 interchange. Some special versions equipped with an additional safety sleeve (VFS) or with an hydraulic lock (VFB) to prevent accidental disconnections are available in the range.
VU Series
Item #: VU Series
Check valves acting as a safety device into hydraulic systems. Standard versions contain a spring set to open the valve at 35KPa; the range of settings is wide (up to 950 kPa). Normally available with inlet and outlet female threads.
3CFHF Series
Item #: 3CFHF Series
Push-pull female couplings for high flow rate applications, connectable with male under residual pressure. Breakaway function. Can be screwed directly into valve ports or rigid pipes. ISO 7241 part A interchange. Flow rate up to 250 l/min.
Stainless Steel Camlock Type BW Coupler
Item #: BWCAMSS
Stainless Steel Camlock Type BWB – Female Camlock Coupler x Pipe Buttweld
12 x 20/25mm BSP Universal Tap Adaptor
Item #: Tap_Connector
Garden Hose Tap AdaptorFeatures:- 12mm snap adaptor - UV stabilised - Tough and durable This Universal Tap Adaptor will fit any 20 or 25mm BSP threaded Tap. It has a 12mm snap fitting.
BSM (RJT) FEMALE WITH NUT
Item #: RJTFNUT
RJT FEMALE BS 4825 Part:5Stainless Steel Hygienic Crimp StemFeatures: - Supplied with material test reports in accordance with EN:10204 3.1. - All Sanitary/Hygienic Stainless Steel Stems are manufactured from grade ASTM 316L/1.4404 Seamless Tube, Hollow Bored Bar or alternatively ASTM A350/351M Grade CF8M and supplied in a fully machined condition. - Manufactured utilising design calculations to determine that the yield stress is sufficient to ensure that brittle fracture/premature failure will not occur. - Other sizes available to order.
BSM (RJT) FEMALE CIP WITH NUT
Item #: CRJTFNUT
RJT FEMALE-CIP BS 4825 Part:5Stainless Steel Hygienic Crimp StemFeatures: - Supplied with material test reports in accordance with EN:10204 3.1. - All Sanitary/Hygienic Stainless Steel Stems are manufactured from grade ASTM 316L/1.4404 Seamless Tube, Hollow Bored Bar or alternatively ASTM A350/351M Grade CF8M and supplied in a fully machined condition. - Manufactured utilising design calculations to determine that the yield stress is sufficient to ensure that brittle fracture/premature failure will not occur. - Other sizes available to order.
Camlock Type BC - 68° Bend - Composite Tail
Item #: CAM68DEGACT
Bent Camlock designed specifically for composite hose. The 68 Degree Bend allows the hose to drop towards the ground removing stress from the hose when connected to a horizontal hose point.Manufactured from A356 Grade Aluminium, T6 Heat treated. Finish: Clear Annodised Brass Ergonomic Lever. The MCC 68 Deg Bent Camlock has been designed with a provision for safety pins to enable the Camlock levers to be secured in place. Note: Safety Pins sold separately.
M80X3 IBC Female Kingtainer x S60X6 IBC Male
Item #: M80X3S60X6
IBC Adaptor to suit Chinese Kingtainer 80MM fine thread to S60X6 (2") Buttress Thread.Material: Polypropylene
Spout
Item #: IBC_SPOUT
Spout designed specifically to fit the S60X6 3-Piece Cap.(IBCC60-2)Simply disassemble the 3-Piece Cap and insert the outlet side of the spout through the thread side of the hollow cap. Push the spout right through until the raised flange comes to rest inside the cap. Re-insert the PE Gasket and then thread to a mating S60X6 Male Fitting or Valve.
