Camlock Gaskets - FKM

Item #: 100V

Your Price: $6.77 / each ea
Listed Price: $6.77 / each ea
The terms FPM, FKM and Viton® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material:fluoro rubber.

FPM is the international abbreviation according to DIN/ISO, whereas
FKM is the short form for the fluoroelastomer category according to the American standard ASTM.
Viton® is the registered trade mark of DuPont Performance Elastomers.

MCC uses the designation FKM for all of its fluoro-elastomer materials.

The MCC Camlock Rubber Gaskets comply with Mil Spec A-A-59326D

MCC Camlocks are supplied standard with nitrile material for use in temperatures above -30 °C. Nitrile gaskets should conform to ASTM D2000, Grade M2BG610 B14EA14EF21F17Z1Z2.

The compression set after 22 hours @ 70°Centigrade will not exceed 60 percent when tested in accordance with ASTM D395.

Colour: Black (will have "V" embossed on the side of the gasket) or Red